Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: 60 degrees mitre cut.... huh?
-
7th June 2009, 07:05 PM #1Intermediate Member
- Join Date
- Apr 2008
- Location
- Aus
- Posts
- 35
60 degrees mitre cut.... huh?
hey guys, i want to make a triangle box which requires a 60 degree mitre cut however my TS only goes to 45. Originally i was going to cut all the angle at 30 degrees and then use an insert to make it up to 60 however when i did a prototype i didnt like the look.
any help is appreciated. Thanks
-
7th June 2009 07:05 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th June 2009, 07:39 PM #2Golden Member
- Join Date
- Oct 2006
- Location
- Dandenong Ranges
- Age
- 47
- Posts
- 816
Not sure how you might do that, but perhaps you can build a triangular "wedge" to rest your piece on. If the wedge is 30* in the bottom corner (closest to the blade) then you keep your blade at 90* giving you a 60* cut.
Here's a really rough sketch of what I mean (not to scale):
Attachment 107310___________________________________________________________
"The things I make may be for others, but how I make them is for me."
-
7th June 2009, 07:59 PM #3
I've made a sled similar to what afro's talking about. (Just in case you don't know, a sled is a "sliding table" that fits into the mitre slot.)
It's built at 45°, so to get a 60° cut all I need to do is tilt the blade to 15°
The piece is best clamped to the sled; holding it in position by hand is way less than accurate... Trust me on this.
- Andy Mc
-
8th June 2009, 04:52 PM #4
-
8th June 2009, 05:24 PM #5
In fact I clamp nearly all my cuts on chop, table saw or sawing board, just makes them that more accurate.
The bandsaw I use a clamp and block at the fence backside to stop any lateral movement as well.woody U.K.
"Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln
-
8th June 2009, 07:20 PM #6
Maybe that's why I can't do mitred corners
No clamps
No sleds
Nooooooo!!!!!!!!Check my facebook:rhbtimber
-
9th June 2009, 02:59 PM #7Intermediate Member
- Join Date
- Apr 2008
- Location
- Aus
- Posts
- 35
Ok i have done it, and it wasnt as hard as i thought it would be. I will be making a W.I.P of my progress which will include pictures of my solution, basically all i did was set my table saw to 30 degrees ran a bit of pine through. Placed the 30 degree mitre cut on a flat bit of MDF and freds your uncle. The saw was then set back to 90 degrees and the piece ran through. kinda hard to explain but wait for the W.I.P I will probably get started this weekend.
sinners
Similar Threads
-
Poly in < 10 degrees
By Lumber Bunker in forum FINISHINGReplies: 9Last Post: 31st July 2008, 12:57 AM -
Uni degrees
By MathewA in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 7Last Post: 5th March 2006, 05:31 PM -
Doweling at other than 90 degrees
By phcrum in forum WOODWORK - GENERALReplies: 10Last Post: 5th January 2005, 08:41 AM -
90 or 45 degrees
By jow104 in forum ROUTING FORUMReplies: 10Last Post: 3rd October 2004, 12:02 AM -
7 Degrees of Blonde
By Simple in forum WOODIES JOKESReplies: 0Last Post: 29th August 2003, 03:53 PM