Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 22 of 22
-
28th May 2013, 07:52 PM #16
Your diamonds look good John.
re the video, don't watch too much of that sort of stuff, it'll make you old.... Steve
-- Monkey see, monkey do --
-
28th May 2013 07:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th May 2013, 11:06 PM #17
What about for the next box having smaller diamonds not actually hitting right at the edge?
-
29th May 2013, 12:00 AM #18Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
-
29th May 2013, 01:06 AM #19
-
29th May 2013, 05:42 AM #20
Great work on that project. The fence really plays an important role to stabilize the piece. I did some resawing, everything should be fair,flat and true.Just saying.
-
29th May 2013, 06:30 PM #21
All are welcome to the thread with items of added interest is my motto.
I cut the corner mitres and made rebates for the sliders then got to the glue up stage of the carcass.
I confess I was not confident of a successful outcome because the timber is very porous and glue is inclined to be absorbed by timber also masking tape will not grip the wood and keep in shape. In fact I had to hold corners of carcass to shape whilst glue got tacky and held. (hence glue marks showing on timber)
However I have had a look at the carcass this morning, although scruffy I am hopefull that everything will come right with some sanding.
8w.jpg
I am now going to practice that tune "The old ruggeg cross)
link here to music,
lead sheets | Wikifonia
You have to register, sometimes takes a day but you can just type in sheet music title and get a fake sheet. (the old rugged cross was a 1913 piece so copyright has finished)woody U.K.
"Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln
-
29th May 2013, 08:40 PM #22
The diamond boxes are looking quite good at this stage. Should come up pretty nicec, I reckon
I'd never heard of the Wikifonia site before - I've bookmarked it. I'm not at all fluent, but can just read sheet music thanks to a couple of years of the Musicianship course when I was young, so it'll be handy for stuff to practice on guitar. After 30 years, it's like starting all over again.... Steve
-- Monkey see, monkey do --
Similar Threads
-
Another tissue box session May 2013
By jow104 in forum BOX MAKINGReplies: 24Last Post: 22nd May 2013, 01:03 PM -
Diamond design tissue box
By jow104 in forum BOX MAKINGReplies: 11Last Post: 31st May 2012, 11:51 PM -
Diamond shaped insert tools
By Pete F in forum METALWORK FORUMReplies: 31Last Post: 6th May 2011, 03:25 AM -
A diamond pattern tissue box
By jow104 in forum BOX MAKINGReplies: 13Last Post: 2nd July 2010, 12:54 AM -
Positioning router on insert, installing insert
By Johncs in forum ROUTING FORUMReplies: 4Last Post: 26th March 2009, 09:20 PM