Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: sanding and staining
-
14th June 2004, 12:13 PM #1
New Member
- Join Date
- Jun 2004
- Location
- Australia
- Posts
- 1
sanding and staining
I am currently sanding back an old table to eventually stain it. The legs are covered with "hardboard" and i was wondering if anyone can tell me if hardboard is receptive to staining or not.
-
14th June 2004 12:13 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th June 2004, 12:23 PM #2
Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
Hi and welcome to the forum.
You will find that most timber will stain, it is always best to try it out in a piece of scrap or on some where that wont be seen.
Ok, I just saw that you ment hardboard, and not hardwood.
Same applies.
Al
-
15th June 2004, 06:29 PM #3
GOLD MEMBER
- Join Date
- Apr 2002
- Location
- Brisbane
- Posts
- 5,773
If by hardboard you mean masonite or similar. Shes already prety dark mate.
It does varnish well.
If you mean MDF or similar light boards.
I hate to say this but it can clear finish & look quite atractive so it would probably look ok with some colour added. If it stained at all well.
try what have you got to loose
Reply With Quote
