Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
-
3rd April 2008, 10:28 PM #1Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
Ripping small & narrow pieces on table saw
G'day mates
I had to rip a few small pieces for some router table aid/fixture and I would like to share with you the method.
I'm using an Auxiliary fence clamped to the rip fence...now, when I'm saying Aux fence.... give me some good width say, 100~150 mm....you don't like to "drive" in congested areas, do you...
Before clamping the aux fence, give it a pass through the blade just to make sure that its parallel and consistent in width.
As you will see, I'm holding both hands on the trowel and that, doesn't leave too many hands or fingers to be used as a "Backer board" for the workpiece...saves a lot of money...
Regards
niki
-
3rd April 2008 10:28 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
3rd April 2008, 10:29 PM #2Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
-
3rd April 2008, 11:14 PM #3
Great post niki and as usual,beautifully and graphically presented. have bookmarked the thread for future reference. Always a pleasure to read your threads.
Reality is no background music.
Cheers John
-
3rd April 2008, 11:26 PM #4
Yup, good for short bits but....
While I was at my friend's place in Tassie last month, we had a half a day in his boat shed & I asked to help... he wanted 2 pieces of pine cut 10mm x 6mm x 4200mm for the canoe he was working on.
Pics here.
We did it on the Triton... it was a 2 man job, one on the in feed & one on the out feed.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
4th April 2008, 08:26 AM #5
Niki your a wiz with simplicity
-
4th April 2008, 11:41 AM #6
Great work niki! I've just been considering how I'm going to cut a bunch of 15mm wide strips on the table saw.... and this is the first thread I saw while hovering over the search button
"Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so."
- Douglas Adams
-
4th April 2008, 04:42 PM #7Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
More of Niki's wizardry
As always Niki, simple, efficient and ver safe!!
-
4th April 2008, 09:47 PM #8Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
Thank you so much for your kind words mates
Cliff
4.2 Meters??? My shed is not long like that....and you need infeed and outfeed area...well, I'm lucky that I don't need such a long strips, 1.5M was the longest that I cut.
Regards
niki
-
4th April 2008, 10:38 PM #9
Great idea
thanks for the post
-
4th April 2008, 11:40 PM #10
Good jig Niki!
....................................................................
-
5th April 2008, 08:49 AM #11Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
Thank you so much mates
I’m working now on another method that can be used with a normal sled just by adding some kind of small fixture….it’s in the “kitchen” now and when it will be “cooked” and “tasted”, I’ll post it…
Thanks again
niki
Similar Threads
-
Routing small pieces
By Tiger in forum ROUTING FORUMReplies: 15Last Post: 4th December 2007, 12:10 AM -
Cutting very small pieces on table saw
By niki in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 6Last Post: 21st August 2007, 11:29 PM -
A Jointer for small pieces for $15
By routermaniac in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 11Last Post: 18th December 2005, 03:12 PM -
Ripping Short Narrow Strips on a SCMS
By mat in forum WOODWORK - GENERALReplies: 4Last Post: 9th March 2005, 02:46 AM