Search:

first thing i see from a bad photo is what looks like some big iron bark in the top right logs with the bark on .It looks like some poor logs in the front were one has been moved . You will not get...

Hi MM I have a set of used ones they are still ok i put new one on my mill before i sold it you can have them

From what i have cut from wharf piles ,it can be a real disappointment .The star cracks on the end of log give a good indication of what any timber cut out of the logs will do.They are usually very...

Would that be the one on the southern side of town with the keep out posts around it and the massive burl in the fork ,went past it today lovely tree.

Is it not one extra layer of board not one extra board ,if milling for flooring /decking (100x26) and then one top one bottom and extra through the middle third the production of sawdust is also...

its hessian with a paper backing it is not webbing ,webbing is only 50mm wide and a lot thicker than your pic .I have not seen that before and hessian is a lot wider that what you have.

I like to mill with the small end near me ,i see the log better and what is possible out of the log .

Hi movay it sounds like owner would like to see some of it gone . Would be keen on some , have crane truck, bobcat ,chainsaws.I take it, it is just over the border in nsw ?

missed the show but have a look at his web site in his news letters he condemed the supply of timber from the hornibrook bridge as contaminated and should not be used(sour grapes because some one...

Archtectural hardwoods in Kempsey has the rest it will not be cheap ,they re mill the old griders and have klins and planers ,Sam is the man

Done some last week , cut them to 160x110 then put a rebate 80x15 for door jambs . let me know if i can help I am in the sunshine coast area

you work the other way for MC you weigh it then dry the timber in an oven until there is no change in weight (no change in weight no moisturein timber sample)The difference in weight expressed as a %...

they are reseller selling mainly boral timber as said the page opens with a feature grade price @ $66m2 select is $98 m2 chance of finding a feature floor in grey box would be slim ,hence they would...

Thanks timboz was not sure myself , what sizes would you mill for best use of timber?

hey pete what size did you cut the veneers and that looks like cardboard in between is that enough to hold them flat .

I now have this in the yard .what to do next. The tray on the truck is 6m and i still have to pick up the main trunk to big for my truck i bent one of the 3.6ton bobcat ramps getting it on 186551
...

would take a look will pm my number

how much do you need

I use a resaw bandsaw to mill 2 inch thick stock ,if you can find one cut the stock to 110 mm and get three boards that would save some timber. It is amazing how much is left behind as saw dust .

must of had a breach barney as it is not a barrier they go through it and pick it up and return to the nest which is why it is the best on the market ,ebay usa does have it and last time i looked...

Hi Scott had the similar problem .With mine it was blade sharpnening the angle was out ,lucas gave me the fix, take the diamondstone off the little motor and put it on upside down and use a square to...

please send through pricing and amount of each speices .
thanks

hey sigidi nice job ,some questions for you
What was the timber
From the pics it looks like you made 3-4 passes to do the job are your winders accurate for the job and what mm did you come down...

jinker here on sunshie coast was $125 Hr start to finish ,Has own crane and loads in about 1/2 hr . Timber should be fine ,I would be there dock them and moved into loads for the semi.

Try ironwood or second hand building center might be best to look for a piece a bit bigger and resize ,if replacing one board you may not get a t&g piece to fit in just shape what is required with a...

Not too far sunny coast ,but there are two others as well , what do you need doing.
john

I have a log in the yard i can cut any size you are after . would have to have KD ,the log has been there for a while so not sure of the state it is in ,I know the outside of dunnii dosn't weather...

hey bob why would you be putting your hand anywhere near that thing when spinning, it is still a chain saw .

I can give you the name of some floor installers on the coast that would do the job they are amost a trade nowdays thats all they do is install .there are plenty of home with upto 200x22 mm flooring...

Can i get one of thoses box thinges please .Been pushing and pulling in the sun all day summer is allmost here.

The 8 and 10 inch both use the same motor but i think the gearboxes are not the same .If all you want it for is to split the log then look at just the dedicated slaber that lucas produce . The...

Make sure you are straped in Get some photo when you do . I have a jd 250 3.5 ton tipload 1.6 ton rated for about 900kg will push it to 1.2 ton .tipping load is the point it will tip over not the...

nice machine they come in real handy . Carl don't think they will lift 1.4 ton they would be
rated at 1400 lb maybe , then again carl who knows what you got planed for it.

wohoo you are the man experience hey, the two photos show a 8.4 m 350x280 cut on my mill being lifted in to my house . dont need to go out side to know when when i read crap.

you put it out there in your first post 7.6m .maybe that is why you should

And some people just don,t like to be pulled up and get very testy don,t they .Put what ever spin on it you like .

think you did

Good effort inter to do the beams with what you had bit of mucking around with the chainsaw to do the cuts that the mill was unable to do. Sigidi 6.75m is still not 7.1.

Would like to see how that is done .The blade can not clear the log at either end , if you go to the side to flip the blade to vertical you can't move it back . The 6m rail with the 1m extenions i...

8 /30 lucas when i got the mill i purchased the 6m rails with the 2m extentions , didn't like the set up and had the chance to get the 8m rails so grabed them.

8m rails 2m extentions and 1m ends.Now who as the 10m log?

some times get that groove , just skim the top .The ten inch has the strut good idea taken from the eco saw .allows full depth cut without rail bounce . I think lucas improved it by adding a spring...

your saw still cuts a straight line from one end to the other no matter where the bolsters are

carl no matter where your supports are under the log the bow in the log is the same , u can also use the log as a bench cut over size ,trim L shape left in the log , reposition timber and trim one...

I would not accept that. What was the MC in the floor boards at the start and what is it now. How wide are the boards anything over 80mm at 14 mm thick can be a problem.Easy for the installer to...

how much of it do you need ?

did i dream it or has the dip stick filler cap have a magnet on he end

hi brad i would be interested in picking it up pm sent

if it was my flooring no problem asking $5 per l/m as long as it is in good nik

i have recycled bridge timber that is dry and stable ,cut to length transport is simple,turn around dressed ready to ship 7 days